This instruction has been tested to work 100%, it requires you to have any tool thatcan bypass Authentication, and use with SP Flash Tool for the main procedure.
Follow instructions carefully, and leave a feed back on our site as it is confirmed to be working for you.
1.Open Sp Flash Tool
2.Load Scartter File provided with file as shown below
Image
3.Uncheck Preloader after loading Scartter file
Image
4. Go to Format, then Manual, Bypass Auth and copy and paste the addresses as shown below:
Begin Address: 0x1800000
Format Length: 0x4000000
See Screenshot below
Image
5. Repeat the same procedure again, Bypass Auth, Copy and Paste The Second Addresses as follows:
Begin Address: 0xfc00000
Format Length: 0x4000000
Once you have formated the above addresses, you are now set for the final procedure which involves repairing the imei:
You can now repair a new imei.
Then Patch Certificate with chimera Tool. ALL done 100% permanently unlocked.
Regards,
